The Stainless Steel Hurricane® pump is capable of pumping up to 150 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive’s Stainless Steel Pumps are patented for their unique design (#7584785).
Simple to use and extremely powerful!
The SS Hurricane® is capable of pumping up to 150 feet from ground level to water level.
Simply, connect the pump connector to the Low Flow with Power Booster 2.5 “LCD” Controller, then to a 12 volt battery, energizing the pump.
We think so. For the harsh environments!
The SS Hurricane® can operate under harsh conditions with higher turbidity.
The SS Hurricane® has been installed in hundreds of remediation sites using pump and treat systems.
The SS Hurricane® can also be used with solar panels for long term remediation sites!
Why choose the SS Hurricane®?
Simple to use!
Runs off any 12 volt DC batteries.
Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 “LCD” Controller and Non-Return Check Valve.
Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 “LCD” Controller makes adjusting and reading the discharge rate a breeze!
Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity.
Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
Simple to clean and decontaminate!
The SS Hurricane® is only 1.82″ OD and constructed of three high polished stainless steel parts:
1.The replaceable motor module
2.The motor housing top connector
3.The outside pump housing
SS Hurricane® “30 Second Change Out Motor Design!” – A Great Value!
Should the motor fail, the field technician can change out the SS Hurricane® motor in less than 30 seconds! Tthe SS Hurricane® comes complete with one additional motor module. The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a new pump.
Power Consumption: 920 WATTS (MAX)
Volt Recommendation: 12-15 At Source
Maximum AMP Output: 38 AMPS
Measurements: Length 7.5 ” / Diameter: 1.82″
Constructed: High Polished Stainless Steel
Required Tubing: 3/8″ ID Tubing
Supplied with: 160 feet of Heavy Duty 10 Gauge Wire, Additional Motor Module, Disposable Low Flow Control Valve, and Wrench