Proactive Frontier 60 Pump

The Proactive Frontier 60 Pump is a 12 volt submersible pump is engineered for the homeowner in mind. The Proactive Frontier 60 Pump is a submersible centrifugal pump capable of pumping up to 60 feet from ground level. The Frontier 60 is very easy to use....Just hose clamp onto the pump barb tip a 3/8" id tubing. Then, lower the pump to the desired water depth and energize the pump with a 12 volt power source.  The Frontier 60 pump will fit into a schedule 40 or 80 2 inch well or larger. The Frontier 60 is perfect for showers, toilets, watering shrubs. Please note: The Frontier 60 pump is not suitable for drinking water consumption because the Frontier 60 has yet to be NSF approved.

Simplify and Expedite Your Next Event!

• Frontier 60 can operate under harsh conditions with higher turbidity.
• Frontier 60 can run continuously in water without the need for a cool down
• Frontier 60 has a 1,000 hour motor module life!
• Frontier 60 has a sleek outside that minimizes well hang-ups.
• Frontier 60 is a very reliable and economical pump that provides a great bang for your buck!

Easy to fix if a problem should arise: Let's face it, mechanical parts break down after a while. The life expectancy of the motor module is around 1,000 hours or so.  Please Keep in mind... the life of the motor module depends of course how often it is used (this is for any pump or a matter of fact anything mechanical). The great benefit of the Frontier 60 pump is the patented (#7584785) replaceable motor module that can be changed out within 60 seconds. That means no down time and NO expensive service calls. Just twist in the new motor module and start pumping again, truly peace of mind!! Once the new motor module is installed, your pump is essentially new and will have a life span identical to a new pump. Please note, the Frontier 60 pump ships to you with one motor module installed on the pump.

Important Notes and Friendly Reminders:

•  The Frontier 60 pump cannot be used as pressure pump under any circumstances. The  Frontier 60 pump is engineered to discharge water into a large holding tank of water.  Then from that large holding tank another pump needs to be used to pump to your final destination.
• Do not valve down the Frontier pump with valves or any other mechanical devices.

The Frontier 60 pump is engineered for ease of use. The pump consist of 4 components:

1. The replaceable motor module
2. The motor module 4 Pin Bayonet Connector
3. The outside PVC Housing and PVC Bottom Inlet Filter Screen
4. The pump power wire

Proactive Frontier 60 Pump Chart

Specifications:

WATT CONSUMPTION (MAX):                150 WATTS (MAX)
DC VOLT RECOMMENDATION:              12-15 DC (direct current) At Source
MP CONSUMPTION (MAX):                      10 AMPS
MEASUREMENTS:                                         LENGTH 7.5" / DIAMETER: 1.82"
REQUIRED TUBING:                                    3/8" ID TUBING
SUPPLIED WITH:                                          90 FEET OF HEAVY DUTY 10 GAUGE WIRE WITH ALLIGATOR CLAMPS
PUMP CONSTRUCTION:                            PVC, POLYPROPYLENE, STAINLESS STEEL AND NITRILE